Standard Pattern Brass Ball Valve - WRAS Approved
- Standard Pattern Brass Ball Valve
- Red Aluminium Handle
- Brass Nickel Plated Body
- Screwed BSPP
- Full Bore
- Sizes: 1/4" to 4"
- WRAS Approved
-
Brass Mini Ball Valve Screwdriver Slot Male / Male
From £5.19SKU: BV5061 Availability: Available -
Brass Mini Ball Valve Male / Male
From £4.45SKU: BV5060 Availability: Available -
Standard Pattern Male x Female Brass Ball Valve
From £6.24SKU: BV5024 Availability: Available -
WRAS Approved Male x Female Brass Ball Valve - Red Butterfly Lever
From £6.24SKU: BV5033 Availability: Available
Details
Economy Standard Pattern Brass Ball Valve - WRAS Approved - Red Aluminium Lever
Economy WRAS standard pattern approved brass nickel-plated full-bore ball valve with red aluminium lever in Screwed BSPP, anti-blowout steam and PTFE seats. Temperature range: -20°C to 110°C. This valve is fully WRAS Approved and suitable for use with potable water. This valve has been examined, tested, and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Bylaws. Certificate upon request, applications also include isolation of industrial and domestic process, heating, hot water, cold water, oil, fuel, gas, and air. High performance economy ball valves at the lowest UK valve prices.
Key Features:
- Standard Pattern Brass Ball Valve
- Red Aluminium Handle
- Brass Nickel Plated Body
- Screwed BSPP
- Full Bore
- Sizes: 1/4" to 4"
- Pressure Ratings: PN40 (1/4" to 1/2"), PN32 (3/4" & 1"), PN25 (1 1/4" to 2 1/2"), PN16 (3" & 4")
- Temperature: -20°C to 110°C
- WRAS Approved
Approval
Datasheet:
Technical Attributes
Manufacturer | VOLT |
---|---|
End Connection | BSP |
Body Material | Brass |
Seat Material | PTFE |
Size | 1/4" (DN8), 3/8" (DN10), 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100) |
Design | 2 Piece, Full Bore, Female x Female |
Industry / Approvals | General / Industrial / Process, WRAS |
Lever | Manual Red Aluminium Handle |
Temperature Range | -20°C to 110°C |
Pressure | Up to: PN40 (1/4" to 1/2"), PN32 (3/4" & 1"), PN25 (1 1/4" to 2 1/2"), PN16 (3" & 4") |
Actuatable? | No - Manual Only |
Downloads
The following downloads are available for the Standard Pattern Brass Ball Valve - WRAS Approved:
Standard Pattern Brass Ball Valve - WRAS Approved Datasheet
Standard Pattern Brass Ball Valve - WRAS Approval Certificate
Approvals
The following approvals are available for the Standard Pattern Brass Ball Valve - WRAS Approved:
Standard Pattern Brass Ball Valve - WRAS Approval Certificate