A cost effective 3 Piece, Stainless Steel Ball Valve, fitted to a pneumatic actuator and used to automate systems. The ball valve is fully maintainable, three-piece design, with stainless steel body and RPTFE seats. This valve is used for providing a cost-effective solution for the 'shut-off' of medium flows on semi aggressive fluids.

Actuation is either Single or Double acting and is offered with a range of configurable options including limit switches, solenoid valves and positioners.

The actuator is a pneumatic quarter turn rack and pinion and is sized with a 30% safety factor built-in. To operate the actuator requires a pilot pressure of a minimum of 5.5 Bar and benefits from a Namur interface for both pilot solenoid valve and switchbox.

Key features:

Available in BSPT, sizes: 1/4" to 4".
Pressure range: 1000 PSI
Temperature range: -20°C to 200°C.
Features a blow-out proof stem.

Download our technical PDF datasheet here

Mechanical Limit Switchbox Operation Datasheet

Namur Pilot Solenoid Valve Datasheet

Pneumatic Actuator Datasheet

Technical Attributes

More Information
Manufacturer	VOLT
End Connection	BSPT
Body Material	Stainless Steel
Seat Material	RPTFE
Size	1/4" (DN8), 3/8" (DN10), 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100)
Design	3 Piece, Full Bore, Female x Female
Industry / Approvals	General / Industrial / Process
Temperature Range	-20°C to 200°C
Pressure	Up to: 1000 PSI
Actuator	HP Pneumatic Actuator
Actuator Features	Spring Return or Double Acting