A pneumatic actuated screwed 2 way brass ball valve with PTFE seats has WRAS Approval and is suitable for potable drinking water. The unit is used on general purpose, HVAC and industrial applications; on/off duty, water isolation, water treatment and compressed air. Pneumatically operated, actuation is either Single (spring closed or open) or Double acting with a range of configurable options including limit switches, solenoid valves and positioners.

In addition, our pneumatic quarter turn rack and pinion actuator is sized with a 30% safety factor built-in, requiring a pilot pressure of 5.5 Bar and benefits from a Namur interface for both pilot solenoid valve and switchbox.

Key Features:

Low Cost Automation
Available in Sizes: 1/2" to 2".
BSPP threads
Economic (no mounting brackets)
Works well with selected pilot solenoid and switchbox
Pressure range: Up to 40 Bar (subject to configuration).
Temperature range: -20°C to 95°C.

Pneumatic Actuated Ball Valves are designed to meet the demanding needs of today's process flow control requirements. During build up all actuated packages are rigorously inspected and 100% factory tested prior to dispatch

Datasheet:

Economy Brass Ball Valve With Pneumatic Actuator Datasheet

Technical Attributes

More Information
Manufacturer	VOLT
End Connection	BSP, BSPP
Body Material	Brass
Seat Material	PTFE
Size	1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50)
Design	Full Bore, Female x Female
Industry / Approvals	WRAS
Temperature Range	-20°C to 95°C
Pressure	Up to: PN40
Actuator	Economy Pneumatic Actuator